The Construction Technology and Operating Points of Color Steel Roof Tile Forming Machine

Let's figure out the construction technology and operating points of the colored steel roof tile forming machine:

1. The side-end connection of the color plate produced by the color steel tile forming machine

Each steel plate installation of colored steel roof tile forming machine should be attached to the front plate accurately placed. And with the front of a steel plate clamping, until both ends of the steel plate are fixed. A simple and effective method is to use a pair of clamp pliers to clamp the steel plate attached to the residence separately.

2. When the colored steel roof tile forming machine steel plate is set up along the vertical position

Its end, especially the upper part needs to be clamped with pliers edge part, which can ensure that the colored steel roof tile forming machine steel plate end in place. And it also ensure that one of the bonding is also in the correct position, so as to secure the steel plate, the vertical steel plate can catch the clamps in the process of fixing.

3. How to manage the color steel roof tile forming machine before the installation of the next piece of steel plate?

Colored steel roof tile forming machine must be completely secured. The fixation must start at the center of the steel plate and then extend to both sides to secure the bonding edge of the steel plate. For end-to-end bonding, since roof and wall shape plates are made by continuous processing, steel plates can be supplied according to the length limited by the conditions of transport, usually do not need to be joined, and the length of the steel plate of the colored steel roof tile forming machine is sufficient to meet the needs of roof laying.