Main Structural Features and Main Technical Parameters of EPS Sandwich Panel Production Line Equipment

Main structural characteristics of EPS sandwich panel machine

• This EPS sandwich panel machine is characterized by its beautiful appearance, low noise and high efficiency.

• The EPS sandwich panel production line is welded with H-shaped steel and the surface is treated with shot blasting, which makes the overall structure simple and stable.
  

• The transmission of the continuous laminating body adopts a worm gear and worm transmission to stabilize and control the production speed. Using advanced frequency control, the continuous laminating body can be cut to a fixed length.
  

• There are three sets of heating systems to adapt to the ambient temperature in different places.
  

• The glue supply system is driven separately. It adopts horizontal composite and evenly coated with glue, without any pollution.
  

• The continuous bonding body is long, which can ensure the flatness of the sandwich panel
  

• The cutting system has a long moving stroke, which prolongs the service life of the tool.
  

Main structural components of EPS sandwich panel production line

This EPS sandwich panel production line is composed of a rolling forming machine and a laminating machine. It adopts international rolling forming technology, composite transmission technology, pneumatic and electro-hydraulic control technology. The whole EPS panel production line only needs 6-7 workers.

The entire sandwich panel production line consists of two parts: the rolling forming part and the laminating machine part.

Rolling forming part

The rolling forming machine is composed of hydraulic unwinding machine, guidance system, film pasting system, flat vertical cutting system, rolling forming system, panel support frame, and auxiliary forming machine.

Bonding body

This part consists of a guiding device, bonding body, cutting system, glue applying system, support device and electrical control system.

With the help of the EPS sandwich panel production line, corrugated sandwich panels can be produced directly, without the disadvantages of traditional corrugated sandwich panels, which must be manually laminated after the corrugated sheet is formed. In addition, the rolling forming machine and the laminating system can work independently.

Technical parameters of EPS sandwich panel production line

Specifications of precision sandwich panel machine

Length: The minimum cutting length is 2m, and the maximum cutting length is 15m.

Raw material specifications

• Coil thickness: 0.4~0.6mm (steel smooth without undulations, deformation, bending);

• Plate yield stress: s235MPa;

• Coil maximum width: 1200mm (tolerance + 2mm);

• Coil maximum weight: 4T;

• Coil inner diameter: 500mm and 600mm;

• Coil outer diameter: 1000mm;

• Material applicable width: at least 1/2mm of the finished panel width.

EPS panel production line specifications

• Working line speed: 1000-3000mm/min (frequency conversion speed regulation). Note: Depending on the glue brand, temperature, and operator proficiency;

• Machine length: about 40m;

• Working height: 1050mm (panel output height);

• Bonding effective length: 7.5m;

• Control mode: adopt industrial computer PLC;

• Total power: about 35 kW;

• Power supply: 380V/3 phase/50Hz;

• Control voltage: 24V/110V/220V;

• Pneumatic: 0.7Mpa (self-provided by the factory)

• Best working temperature: around 25°C.